12m Reel Hose
12m Reel Hose
12m Reel Hose
HF-AUFROLLER-LUFT
Schl.aufrol.f.Druckluft+PU-SchlD12x8G1/4
Features
Threaded inlet G 1/4″ female thread
Hose material Polyurethane (PUR)
Body durable red plastic
Connection G 1/4″ male thread with kink protection spring
Working pressure Max. 15 bars
Rotation angle 150°
Operating temperature max +40 °C
Customs tariff number 39173900
Product details
A mm) 355 B mm) 315
Hose size 12 mm x 8 mm Hose length m) 12
Congratulations on your excellent choice. Your new device has been manufactured to a very high standard of quality and will guarantee you long-term performance and safety.
DANGER!
Before working with this device, carefully read the following safety and operating instructions. Before you start using the device, make sure you know how.
can be turned off in an emergency. Improper use of the device may result in personal injury and damage to the device.
lead device. Keep these instructions carefully and at hand so that you can refer to them when you need them.
You can talk.
Safety devices installed by the manufacturer should not be switched off or modified under any circumstances.
GENERAL SAFETY REGULATIONS
1. The product should not be used by children or untrained persons.
2. Always check the correct operation and integrity of the device; otherwise the user may be in serious danger.
3. Do not disassemble or modify the device.
4. Do not insert any objects into the hose reel opening during the winding process.
5. Do not leave the hose during the winding process.
SETUP
Fix the product to the wall or other suitable places using only suitable fixing materials. It is important to ensure that the supply hose is not pinched when using the device.
or it may be damaged.
The product is equipped with a grid system that allows positioning in almost any position. To unlock this grating system, the hose must be pulled briefly to pull the hose up.
to pull it to the desired length. The hose must then be returned to the grill position.
to be able to work with the device without difficulty. The hose reel comes with a ratchet stopper.
keeps the hose in the desired position. As can be seen in the illustration on page 2, the grid stopper can be used for:
free hose winding can be prevented.
PNEUMATIC CONNECTION
1. Connect the hose reel connecting hose to the compressed air source. Here
maximum pressure, do not exceed the maximum pressure specified in the data sheet of the hose reel!
2. If the pressure is higher, a pressure reducer must be installed in the connecting line.
3. A quick-release coupling can be attached to the end of the hose to allow quick tool changes.
will be collected.
4. Do not use gas or flammable liquids.
5. Do not use corrosive liquids (eg acids) or other liquids incompatible with the product.
are retractors.
CARE
Regularly:
• Check spring function and correct hose wrap
• Check for leaks, replace gasket if necessary
• Check the integrity of the hose and remove any dirt
• Check the grill stop function
• Check the reel's connection to the wall
• Check connector and coupling