When Expectations Are High, Choose Hidroman!

When Expectations Are High, Choose Hidroman!

When Expectations Are High, Choose Hidroman!

Currently, the following methods are used for the pipe connections used in hydraulic systems.

Ferrule Pipe Connection Method
Welded Pipe Connection Method
Ferrule System
In the ferrule system, the application is realized by tightening the ferrule key half, which is an independent piece on the pipe surface, by making the ferrule notches on the pipe surface. Even when using in low pressure systems, oil leaks are seen quite a lot. While the load is being applied, the probability of the thimble cracking is very high with the possibility of the operator to squeeze the thimble with the thimble, and the thimble to squeeze the thimble.

Welded System
The source applied in welded connections is of great importance. Even if the welding is applied properly to the surface of the pipe, it is likely that oil leaks from the welding point in vibrating and / or peak pressure areas. In the welded application, the welding applied to the inner surface of the pipe, through which the fluid will pass, narrows the transition diameter in the pipe, causing heat and pressure losses in the hydraulic system. In addition, the fluid passing by hitting the source applied to the inner diameter causes cavitation in the system. Since the inner diameter of the pipe is not cleaned properly after the applied welding method, unwanted particles will be included in the hydraulic system, causing sudden breakdowns.

SeideForm application is the form method given on the pipe without using ferrules or welding.

Seide Form has been developed entirely with standard components. Integrated elastamer insulated form collar is inserted into the shaped end of the pipe.

Hidroman has taken another important step towards becoming a business partner with a comprehensive R&D and manufacturing capacity in pipe connection technologies and providing complete solutions. The new forming system stands out with its extremely easy assembly process and especially the high level of security it offers.

An integrated elastromer-insulated Seide form collar with no risk of loss is inserted into the shaped end of the pipe. This combination, created with an ordinary 24-tapered sleeve, and a nut conforming to the ISO 8434-1 standard, provides reliable, permanent and maintenance-free insulation at a single leak point.

Thanks to the insulating effect supported by the system pressure of the hydraulic installation, the new forming system is ideal for high pressure applications. This application is designed for sizes from 10mm Pipe to 42mm pipe.

Competing Products VS Seide Form