High Pressure Portable Test Unit

High Pressure Portable Test Unit

High Pressure Portable Test Unit

Seide OSM1000 Hose Test Equipment is the easiest way to test hydraulic hoses or pipelines up to 1000 bar pressure with a portable type high pressure test unit suitable for field use, either with hydraulic oil or water.

Hydraulic equipment has to be tested according to European Union norms. All products must be certified and approved for hydraulic system installation and equipment supply. This system is advancing in European standards for both Turkey and European partners or OEM manufacturers.
Thanks to our Seide OSM Series Test Machines, you can certify all the hydraulic equipment you have produced and present them to your customers in a certified way. To ensure the reliability of hydraulic hoses, each hose must be static pressure tested for 60 seconds at 1.5 times the working pressure of the hose. You can observe and report sealing capabilities with our Hydraulic Hose Testing Machines, which enable you to perform these tests safely. Hoses and pipelines that cannot withstand high pressure can cause serious damage, resulting in high costs. Often these damages are higher than the price of a test bench. Thanks to our Hydraulic Equipment Testing Machine, you can get rid of all risks.

With our OSM 2200 Test Machine, you can test all your hoses and pipelines from 50 Bar to 2200 Bar. The OSM Series workshop test bench allows for efficient and safe final inspection and testing of hose lines. It is easy to operate and quickly becomes part of your routine procedures. Our Hydraulic Equipment Testing Machines are subjected to all safety and operating tests before customer delivery. The lid and unbreakable glass are checked by our quality control engineers for your safety. With the PLC system, our hydraulic test machines are operated under all conditions and are made ready for use for our customers as a result of quality control processes.

Key features

• CE Compliant, lockable closed test chamber
• Printing the Direct Test Report after the test process
• Environmentally friendly test environment
• Easy and Safe use
• Priming pump
• Also suitable for static pressure testing of various hydraulic components.
(Valves, Hydraulic Cylinders, Hoses, Emergency Release Couplings etc.)
• Safety Valve is available. All pressure drops within 0.1 second when the safety valve is opened.

Technicial Specifications

Static Test Pressure up to 1000 Bar
Minimum Starting Pressure 70 Bar
Control System Hydraulic / Pneumatic
Test Liquid Oil, Water, Solution, Solvent
Test Capacity 3/16” – 2”
Air Inlet Pressure 7 Bar
High Pressure Pump Flow 0.3 lt/min
Pre-Fill Pump Flow 20 lt/min
Tank Volume 10 lt
Noise Level 72 dBA

Pressure Equipment Directive
The regulation specifies the safety requirements for the design and manufacturing stages for pressure equipment.

Hydrostatic pressure test is foreseen for the manufacturing phase.

For test pressure,

Taking into account the maximum allowable pressure and maximum allowable temperature, it is stipulated that the maximum pressure to which the pressure equipment in service is exposed should not be less than the value multiplied by the coefficient of 1.25, or for higher values, the value corresponding to the multiplication of the maximum allowable pressure by 1.43.

To perform hydrostatic tests of your pressure equipment during the production phase,