Hydraulic Hose Crimping Machine

Hydraulic Hose Crimping Machine

SEIDE S51 HYDRAULIC HOSE CRIMPING MACHINE

With the Seide S51 Hydraulic Hose Press, you can press the hose couplings of 2" sized hydraulic hoses starting from 3/16" Diameter Hydraulic Hoses.

Seide S51 Hydraulic Hose Press, which is a domestic production, will not let your production down with its wide spare parts network and service network.

Hydraulic Hose Press Machine Parts

1.The main body on which the molds are attached
2.Control Board
3.Pressing Diameter Adjustment Micrometer
4.Electrical Connection Switch (used to cut and open the electrical current coming to the machine)
5.Pressure indicator
6.Hydraulic Oil Tank

Hydraulic Hose Press Control Panel

1.CRIMP : Hose Pressing Button
2.OPEN: Mold Open Button
3.AUTO/MANUEL: Manual Control- Automatic Control Button
4.ENGINE START: Machine Start Button
5.STOP: Emergency Stop
6.Machine Opening Distance Setting

MOLD SELECTION

Only use original molds on the machine
Choose the die as close as possible to the clamping size.
The clamping range of the dies is as follows.
These dimensions are taken into account when choosing the molds.

 

D	TIGHTENING RANGE
15	15……18mm
18	18……21mm
21	21……24mm
24	24……27mm
27	27……33mm
33	33……39mm
39	39……45mm
45	45……51mm
51	51……57mm
57	57……66mm
66	66……75mm

MOLD REPLACEMENT

After the mold to be used is selected, the spring pins are pulled with the mold changing apparatus and the molds are set in place one by one. The molds are removed by pulling the spring pins with the help of the apparatus in the same way as the disassembly process.

MICROMETER SETTING

According to the diameter size to be pressed, micrometer adjustment is made with the help of the table below. Micrometer 0 Setting: 10.7mm.