MİNİBOOSTER Turkey
MİNİBOOSTER Turkey
MİNİBOOSTER Turkey
miniBOOSTER Hydraulics A/S company profile
miniBOOSTER is a Danish company based in Sønderborg situated in the south of Jutland.
miniBOOSTER was founded on the 1st of January 1994. The first six and a half years we were known as Iversen Hydraulics ApS. In 2000, we changed to our present name miniBOOSTER Hydraulics A/S.
During this period, miniBOOSTER has developed a comprehensive application and product range. Consequently, we have successfully grown to be the world’s largest manufacturer of oscillating boosters, selling our products all over the globe, via a worldwide distribution network.
MAXIMUM POWER
Whether your challenge is increasing force and torque performance or reducing footprint while hitting the right cost point, miniBOOSTER can help you boost productivity and get the job done right.
Our wide product range includes solutions for pressure up to 5,000 bar, flow up to 400 l/min and almost every fluid media.
What is a miniBOOSTER?
miniBOOSTERs are oscillating pressure intensifiers that can be mounted on low-pressure hydraulic systems. The miniBOOSTER will automatically intensify system pressure giving a higher outlet pressure. The miniBOOSTERs come in a vast range of models, each representing different functions for different environments.
Product range from miniBOOSTER Hydraulics A/S
We have a comprehensive range of hydraulic pressure intensifiers that cover 13 intensification factors up to 5,000 bar and flows up to 400 l/min, using almost any media including tap water. The range covers flanged versions, tube versions and cartridge versions and includes standard blocks with built-in valves option that dramatically reduces the need for space and piping.
The miniBOOSTER product range covers your needs. View the entire miniBOOSTER product range in table format, containing data such as flow, pressure, weight and material.
How does miniBOOSTER work?
High-performance intensification
miniBOOSTERs are oscillating boosters. They automatically intensify system pressure giving a higher outlet pressure and will compensate for oil loss on the high-pressure side. This function of the miniBOOSTER is based on the patented system as shown in the animation.
The basic design incorporates a low-pressure piston (LP), a high-pressure piston (HP), and a bistable reversing valve (BV1). The dump valve (DV) is an optional feature.
Hydraulic fluid at system pressure is supplied to port IN. It flows freely through check valves KV1, KV2 and DV (if included) via port H. At this point all flow goes through the booster, and a cylinder on the high pressure side H will move forward at high speed. As the cylinder meets resistance pressure increases in the high-pressure side H equal to the pump supply pressure. This causes check valves KV1 and DV to close and the oil is directed to Vol 1. The bistable valve BV1 connects Vol 2 to the tank via Vol 3. As pump pressure is applied to Vol 1 the pistons move downwards.
When the piston has fully moved down, Pilot Supply 1 is energised operating the bistable valve BV1 changing its position. Fluid is led to Vol 2 moving the pistons upward delivering fluid at higher pressure. The resultant pressure is determined by the ratio in area of the low pressure piston LP to the high-pressure piston (HP).
Once the high-pressure piston (HP) has moved up, Pilot Supply 1 is connected to the tank, the bistable valve BV1 returns to its original position, and the cycle is repeated until the required end pressure has been established. At that point, the intensifier stops and will only start again to maintain the pressure at the high pressure side of H.
Pressure can be relieved from the high-pressure side through the pilot-operated check valve DV (if included). By connecting port R to the supply pressure and port IN to the tank, Pilot Supply 3 will be pressurised, allowing the fluid from the high-pressure side H to flow back to the tank.