Oil Service Units
Oil Service Units
UMPCL 045 Lightline
- Easy filling, cleaning and pumping over Unbeatable ergonomics, optimal handling High filtration performance Wide viscosity range
- With integrated particle monitor With 1~ or 3~ phase electric motor
- Description
Subject to change · 80.75-EN/US · 0121 Switching valve 1 Switching valve 2 Front panel of the UMPC 045 Lightline with adjustable flow range The UMPCL 045 Lightline is an oil service unit designed for filling and cleaning of hydraulic or lubrication systems and for transferring of fluids. Its compact size and ergonomic design allow easy handling in minimal work spaces. Protection of systems through ultra-fine filtration The EXAPOR®MAX 2 ultra-fine filter element is the heart of the UMPCL 045. A high separation efficiency and a large dirt-holding capacity of the filter elements (up to 1980 g) make the UMPCL 045 an economical choice for our customers.
Monitored filtration
The unit is equipped with an oil cleanliness monitor. The OPCom particle sensor permanently monitors the current cleanliness class during the cleaning or filling process. The data stored in the internal memory can be transmitted to a computer. Flexible and universal device Optionally, the unit can be equipped with frequency converter and potentiometer for adjusting the flow rate in
the range of 20 - 70 l/min / 5.3 -18.5 gpm. This additional feature makes the UMPCL 045 even more universal and extends its use to smaller and larger systems. The flow rate can be adapted to the actual need depending on the tank size and / or required speed of the filtration / oil transfer. Switching valve 1 for changing operating modes Installed in the pump block - to switch between two modes: “filtering“ and “pumping without filtering“. Switching valve 2 for selecting the sampling point Installed in the front panel - for cleanliness measurement: “behind filter” (e.g. when filling systems) or “before filter” (e.g. for tank cleaning).- Nominal flow rate
up to 70 l/min / 18.5 gpm - see Ordering Code
Operating pressure max. 7 bar / 101 psi
Viscosity range* 15 - 1100 mm2 /s - continuous operation, flow 20 l/min / 5.3 gpm 15 - 600 mm2 /s - continuous operation, flow 45 l/min / 11.9 gpm 15 - 400 mm2 /s - continuous operation, flow 70 l/min / 18.5 gpm
Temperature range of fluids 0 °C ... +65 °C / +32 °F ... +149 °F
(also see table Viscosity Range) Ambient temperature range 0 °C ... +50 °C / +32 °F ... +122 °F
Pump design
Internal gear pump Electrical motor 3 ~ 400/460 V / 50/60 Hz, 1.1kW
Protection type: IP 54
Electrical connection** Cable length 6 m / 19.7 ft with the following electric plug:- Clogging indicator
optical clogging indication DG 042-04 (all types) ∆p = 3,5 ±0.5 bar Hydraulic connection
Suction side:
Hose DN 32, length 2.7 m / 8.9 ft with suction pipe Suction strainer: Screen element 280 μm, ordering code S9.0417-13 Pressure side***: Hose DN 25, length 2.7 m / 8.9 ft with pressure pipe Permitted suction heights max. 2 m (unfilled) max. 6 m (in operating condition) Hydraulic fluids ineral oil and biodegradable fluids (HEES and HETG, see info service sheet 00.20). Other fluids on request.
Weight
approx. 85 kg / 187.4 lbs
Operating and transport position
Operating position: upright
Transport position: upright or horizontal
Accessories
Quick connection adapters for suction and pressure hose available on request * An exact measurement of the oil cleanliness class is only possible within a viscosity range from 15 mm2 /s to 300 mm2 /s / 70 SUS to 1160 SUS ** For electric cable extension - see Ordering Code. Model 12050 is delivered without electric plug or the plug version should be defined individually *** For pressure hose extension - see Ordering Code